Skip to main content

Documentation Index

Fetch the complete documentation index at: https://docs.mykit.info/llms.txt

Use this file to discover all available pages before exploring further.

​
Installation

  1. Open the Garmin Connect IQ Store on your phone or at apps.garmin.com.
  2. Search for MyKit.
  3. Tap Install and confirm the target device is your Tactix Delta.
  4. The app appears under Apps on the watch after the next sync.

​
Pairing on first launch

The first time you open the app on the watch, it shows the Pairing screen.
  1. Enter the 6-digit code from your MyKit.info profile (see Pairing a Watch).
  2. The watch exchanges the code for an API key and confirms pairing.
  3. The main screen appears — the app is ready to receive drills.

​
Running a drill

  1. Send a drill from MyKit.info (see Sending Drills).
  2. The watch polls for new drills every ~5 seconds. The drill name and par time appear on screen.
  3. Press the Start button to begin.
  4. The timer runs. The accelerometer listens for shots based on your calibration profile.
  5. Each detected shot increments the shot counter and records a timestamp.
  6. The drill ends when the round count is reached or you press Stop.
  7. A summary screen shows elapsed time and shot count.
  8. Results are submitted to MyKit.info on the next sync.

​
Screen layout during a drill

AreaContent
TopDrill name
Center largeElapsed time
Center smallShot count / total rounds
BottomPar time (flashes red if elapsed time exceeds par)

​
Permissions

The app requires:
  • Sensors — reads the accelerometer for shot detection.
  • Network — polls for drills and submits results via the Garmin Connect companion app.
  • Background — keeps polling while the app is open.

​
Supported devices

Currently supported: Garmin Tactix Delta (all variants). Other Garmin devices with an accelerometer and Connect IQ 3+ may work but are untested.

​
Troubleshooting

SymptomFix
Drill does not appear after sendingEnsure Garmin Connect is open on your phone and the watch has a BLE connection.
Shot count is wrongCalibrate the firearm — see Calibration.
App shows “Not paired” after a phone resetRe-pair from your MyKit.info profile — the old API key is still valid unless revoked.
Results do not appear in Performance tabCheck that Garmin Connect synced after the drill completed (look for the spinner in Connect).